**NEW PRICES**

bargains galore-gotta move some of this stuff!!!

*everything on this page is sold "as is", and is not returnable. email me with questions or for more info

markers for sale:

 

2k WDP Dark Angel LCD-excellent condition, used but not abused:

 

 

This was one of my personal markers, mainly for playing, and some testing. As I was a bit of a gunwhore, it didn't get as much use as one might think because of it's age. It was serviced and had a new board put in a couple years ago, and has been used less than 20 times since. It shoots beautifully. CP flame drop and custom drop cradle included, as well as a Hyperflow HP tank.

-color: green

-newer board

-clean and shoots great

-Tarantula Krinkle-kut trigger

-stock trigger

-volumizer

-drop/cradle

-HP air setup-needs to be hydro-tested

-black SP Freak barrel back

-manual and charger

 

$350 plus shipping

 

2001 WDP "Rock" Angel LCD-superb condition, low "miles":

  SOLD!!!
   

 

clearance stuff:

1 - aftermarket rotating matrix breach with feedtube, raw aluminum. SOLD
2 - infinite position rotating matrix breach with warp-feed adapter (angel feedtube threads), black gloss anodize. SOLD
3 - matrix complete oring kit, includes new style quad orings for better sealing. $5 shipped each kit.
4 - Atomic elbow, guaranteed unbreakable. new $4 shipped.
5 - plastic clamp style elbows. green, blue, red, or clear. new $5 each, specify color.
6 - WDP angel LCD grip panels. Used but in good shape. $12 shipped.
7 - hard rubber wrap around grip panels. new, $6 shipped.
8 - hard rubber grip panels, course diamond checker pattern. $5 shipped.
9 - hard rubber grip panels, fine diamond checker pattern. $5 shipped.
10 - Sheridan VM-68 grip handle complete with panels. $7 shipped.
11 - KAPP tournament locking ring for Autococker pneumatics reg. blue anodize, $6 shipped.
12 - adjustable gas thru stock with standard asa threaded end and locking ring, and quick disconnect nipple. gloss black anodize, $12 shipped.
13 - slightly used Tarantula DB milled Vision ready Impulse body with milled jewel pocket on right side, and Tarantula logo milled into both sides. body has been stripped and anodized a couple of times, so stripping and anodizing again is not recommended. body in good condition, SOLD
14 - slightly used Tarantula ultralight milled Vision ready Impulse body and board tray. body has been stripped and anodized a couple of times, some screw holes are a little on the loose side, which require use of loctite to prevent leaking. color is a very light red. stripping and anodize is not recommended. good condition, $50 shipped.
15 - vertical gripframe to fit angel LCD. early version, grip panel holes are a little off, making it a little tough to get the skins on. includes raw aluminum or gloss black anodized trigger and new buttons. frame is anodized light grey with a few imperfections in the finish. SOLD
16 - vertical gripframe to fit angel LCD. early version, grip panel holes are a little off, making it a little tough to get the skins on. includes raw aluminum or gloss black anodized trigger and new buttons. frame is anodized nearly pewter with a few imperfections in the finish, and the front of the frame has a dent but is only cosmetic. SOLD
17 - Tarantula high rise feedtube for Impulse. gloss black anodize, $15 shipped each. I also have a few raw aluminum ones for $10 shipped each.
18 - Tarantula low rise feedtube for Impulse. gloss black anodize, $15 shipped each. I also have a bunch of raw aluminum ones for $10 shipped each. 
19 - New Designz no rise for Impulse. gloss blue anodize, used but in perfect shape, $15 shipped.
20 - 2k3 shocker stock low rise feedtube. nearly new, gloss black anodize, perfect shape, $12 shipped.
21 - brand new Smart Parts Impulse LPR complete setup, chrome finish. $80 shipped.
22 - New Designz vert asa for Impulse. gloss black anodize, $20 shipped.
23 - Southern Paintball CVS for Impulse. brand new, gloss silver anodize, $80 shipped.
24 - Smart Parts Impulse stock barrel, gloss black anodize, $20 shipped.
25 - Impulse stock gripframe complete with trigger and panels. older style angled return spring, gloss black anodize, $20 shipped.
26 - Benchmark drop forward with dovetail and locking screws, satin black finish, $10 shipped.
27 - angled drop forward with dovetail, satin black anodize, $8 shipped.
28 - Dye chrome drop with asa. $15 shipped.
29 - stock 2k Autococker pneumatics shroud. SOLD
30 - Benchmark 2k Autococker slider gripframe with internals. satin finish, complete. SOLD
31 - ANS Quickpull 2k Autococker bolt, good condition, SOLD
32 - 2k Autococker stock rock reg, SOLD
33 - 2k Autococker stock vert asa, SOLD
34 - Autococker beavertail, chrome, $12 shipped.
35 - Shocktech 2k Autococker trigger plate, chrome, $12 shipped.
36 - KAPP 2k Autococker cocking rod, red anodize, $12 shipped.
37 - KAPP 2k Autococker cocking rod, green anodize, $12 shipped.
38 - KAPP Autococker front block screw, $8 shipped.
39 - Autococker vert asa, chrome, $15 shipped.
40 - Autococker 3-way actuating rod, gloss black anodize, $6 shipped.
41 - stainless braided air hose, standard 1/8-27 NPT threaded ends, 40 inches long, with female quick disconnect end attached, $15 shipped.
42 - stainless braided air hose, standard 1/8-27 NPT threaded ends, $10 each shipped. 4", 5", 9", 10", 11", 12" specify length.
43 - stainless braided high flow air hose, larger diameter, standard 1/8-27 NPT threaded ends, 10" long, $12 shipped.
44 - KAPP 90 degree swivel air inlet elbow, green anodize, $10 shipped.
45 - 45 degree air inlet elbow, silver finish, $4 shipped.
46 - 45 degree air inlet elbow, brass, $2.50 each shipped, or 10 for $20 shipped.
47 - 90 degree air inlet elbow, silver finish, $4 each shipped.
48 - quick disconnect sets, silver finish, $8 each shipped.

 

 

Trigger blanks:

I've somehow accumulated a bunch of unfinished laser-cut triggers over the years. These are for those of you who like to tinker, are handy with a drill and Dremel perhaps, and want a truly custom trigger. At your request, I can finish the pivot pin hole to size and add pre-, post-, and microswitch activation adjustment screw holes for you. These are raw 6061 aluminum. Triggers are $0.50 each, or 10 triggers for $4. For each hole you want me to finish machining (pivot pin hole, adjustment screw hole drill and tap) add $1. Email me with any questions or for availability. Limited quantities, once they're gone there gone!

 

Grippies:

Impulse (shown) and pre 2k3 Shocker comfort grips are available. These neat little grips mount on the back of the gripframe against the bottom of the body, and offer a secure, more comfortable grip on your marker while just hanging around waiting to play, or for those fast breaks at the start of a game. I have them in raw aluminum mainly, but a few in black or silver gloss anodize. $5 each. Email me with any questions.

Universal mini volumizers:

These were made a while ago mainly for style, but offer a volumizing effect due to the small chamber machined into it. They are available in two sizes, small and large. The end is threaded 1/8-27 NPT, which is the standard tapered plug thread common on most markers. These are  available in raw aluminum, but I have a couple in gloss black anodize. $5 each. Email for more info.

 
This page is property of Tarantula Mfg. Copyright 2000-2010.
For problems with this website contact 
tarantulamfg@hotmail.com
Last updated: December 14, 2010 .